Hi,
I cannot start the game - I have installed all latest patches of this date, including the bonus pack, using the Stardock updater software.
The debug.err file is shown below:
Debug Message: Version v1.1 BETA-3 last updated on: Thu Apr 6 14:45:50 2006
Debug Message: Could not find a TGN Serial No.
Debug Message: *********DXDiag info follows.*********
System Info
Time: 4/7/2006, 18:09:22
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Machine Name: P4-3-HT
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Languages: English (Regional Setting: English)
System Manufacturer: MICRO-STAR INC.
System Model: MS-6758
BIOS: Version 1.00
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Physical Memory: 2048MB RAM
Page File: 592MB used, 3352MB available
Windows Dir: C:\WINDOWS
Display Info
Display device 1:
Device Name: \\.\DISPLAY1
Card Name: RADEON X850 Series
Manufacturer: ATI Technologies Inc.
Chip Type: ATI RADEON X850 XT AGP (0x4B49)
DAC Type: Internal DAC(400MHz)
Key Device: Enum\PCI\VEN_1002&DEV_4B49&SUBSYS_03121002&REV_00
Display Memory: 256.0 MB
Current Display Mode: 1280 x 960 (32 bit) (85Hz)
Monitor Name: Philips 109B40
Monitor Max Resolution: 1920,1440
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6601
Driver Date: 2/22/2006 04:46:46
DirectX Acceleration Enabled: Yes
Sound info
Sound device 1:
Description: SB Audigy Audio [BC00]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0004&SUBSYS_00531102&REV_03
Manufacturer ID: 1
Product ID: 100
Driver Name: ctaud2k.sys
Provider: Creative
Driver Version: 5.12.0001.0441
Driver Date: 10/8/2003 10:06:04
Type: WDM
Other Drivers:
Acceleration Level: 3
Cap Flags: 0
Min/Max Sample Rate: 0, 0
Debug Message: *********END dxdiag info.*********
Debug Message: Entering WinMain
Debug Message: ******* Starting Game Shell *******
Debug Message: Going Fullscreen
Debug Message: Preparing to change display settings.
Debug Message: Using multilsample setting: D3DMULTISAMPLE_4_SAMPLES
Debug Message: Could not create the render device using default format. Switching to 16bit
Debug Message: Using multilsample setting: D3DMULTISAMPLE_NONE
Debug Message: Could not create the render device.
Debug Message: InitializeDirect3D Failed.
Debug Message: Now Fullscreen
Debug Message: Shell initialization complete
Debug Message: WM_CLOSE message received.
Debug Message: GameUninitialize start
